Air Conditioning with Automatic and
-Auxiliary Temperature Control
With this system,
you
set a temperature.
You
can then
either let the system adjust airflow and force to maintain
.
the temperature, or
you
can manually adjust the flow
and force. The system works best if you keep your
windows closed while using it.
Fan
Knob
The left
knob
selects the force
of
air you want when the
system
is
not in AUTO. The display will show the
speed. To turn the system off,'push the
knob.
,
Driver Temperature
Knob
The right
knob
sets the temperature for the entire system
when the light on the PASS button isn't lit. If the light is
lit, the knob sets the temperature for the driver. Turn the
knob toward red (clockwise) to raise the temperature.
Turn it toward blue (counterclockwise) to lower the
temperature.
The
display will show your selection for a
few seconds, then the outside temperature will show. If
you push the knob, the system will control the fan speed
and airflow. AUTO will show on the display.
3-4
To Next Page
Loading...
