If
E
and a number appear on the radio display, the tape
won’t play because
of
an error.
ElO:
The tape is tight and the player can’t turn the
taperhubs. Remove the tape. Hold the tape with the
open end down and try to
turn
the right hub
counterclockwise with a pencil. Turn the tape over
and repeat. If the hubs do not turn easily, your tape
may be damaged and should not be used in the
player. Try a new tape to make sure your player is
working properly.
Ell:
The tape is broken. Try a new tape.
If
any error occurs repeatedly or if an error can’t be
corrected, please contact your retailer.
If
your radio
I
displays an error number, write it down and provide it to
your retailer when reporting the problem.
REV
(1):
Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while.the tape reverses.
You
may select stations during
REV
operation by
using TUNE.
FWD
(2):
Press this button to advance-quickly to
another part
of
the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances. You may select stations
during
FWD
operation by
using
TUNE.
PROG
(3):
Press this button to play the other side of
the tape.
00
(4):
Press
this
button to reduce background noise.
Note that the double-D symbol will appear on
the
display.
Dolby@ Noise Reduction is manufactured under a
license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D’ symbol
are
trademarks of
Dolby Laboratories Licensing Corporation.
RDM
(5):
Press
this
button to hear the tracks
in
ranaom,
rather than sequential, order.
RDM
will
appear on the
display when you press
this
button. Press
RDM
again to
turn
off
random-play.
SEEK:
Press the up or down arrow
to
search for the
next or previous selection on the tape. Your tape must
have at least three seconds of silence between each
selection for SEEK to work.
3-20
To Next Page
Loading...
