3.
Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
The shoulder belt may lock if you pull the belt across
you very quickly.
If
this
happens, let the belt go back
slightly to unlock it. Then pull the belt across you
more slowly.
4.
Push the latch plate into
the
buckle until it clicks.
Pull up on the latch plate
to
make sure it is secure.
If
the belt isn’t long enough, see “Safety Belt
Extender’’ at the end of this section.
Make sure the release button on the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had to.
1-12
To Next Page
Loading...
