I
4.
Fill the radiator with the
proper
mix,
up to the
base of the filler neck.
If
you
see a stream of
coolant coming from an
air bleed valve, close the
I
valve. Otherwise, close
the valves after the
radiator is filled.
5.
Rinse or wipe any spilled coolant from the engine
and compartment.
6.
Then fill the coolant recovery tank to the
7.
Put the cap back
on
the coolant recovery tank, but
COLD
mark.
leave the radiator pressure cap
off.
5-21
To Next Page
Loading...
