When you sit
in
a center seating position, you have a lap
To
make the belt shorter, pull its free end as shown until
To
make the belt the belt is snug.
safety belt, which
has
no retractor.
longer, tilt the latch plate and pull
it
along the belt.
-
Buckle, position and release it the same way as the lap
part of a lap-shoulder belt.
If
the belt isn’t long enough,
see “Safety Belt Extender’’ at the end
of
this section.
Make sure the release button on the buckle is positioned
so
you would be able to unbuckle the safety belt quickly
if
you ever had to.
1-26
To Next Page
Loading...
