If the belt stops before it reaches the buckle, tilt the latch
3.
To
make the lap part tight, pull down on the buckle
plate and keep pulling until you can buckle it. end of the belt as you pull up on the shoulder
part.
Pull up on the latch plate to make sure
it
is secure.
If the belt is not long enough, see “Safety Belt
Extender” at the end of this section. Make sure the
release button
on
the buckle is positioned
so
you would
be able to unbuckle the safety belt quickly
if
you ever
had to.
To Next Page
Loading...
