I
Resuming a Set Speed
Increasing Speed While Using Cruise Control
Suppose,you set your cruise control at a desired speed There are two ways to go to a higher speed:
and
then
you
the
brake*
Of
shuts
Off
I
0
Use the accelerator pedal to get to the higher speed.
the cruise control. But you don’t need to reset
it.
Push in the SET button, then release the button
Once you’re going about
25
mph
(40
km/h)
or
more, you can move
the cruise control
switch from
ON
to
R/A (Resume/Accelerate)
for about half a second.
You’ll go right back up
to your chosen speed and
stay there.
and the accelerator pedal. You’ll now cruise at the
higher speed.
Move the cruise switch from
ON
to
WA.
Hold
it
there until you get up to the speed you want, and
then release the switch.
(To
increase your speed
in very small amounts, move the switch to
R/A
for
less than half a second and then release it. Each
time you do this, your vehicle will go
1
mph
(1.6
km/h)
faster.)
The
accelerate feature will only
work
after you set the
cruise control speed by pushing the SET button.
I
To Next Page
Loading...
