Wait at least
30
minutes before checking the transaxle
fluid level if you have been driving:
When outside temperatures
are
above
90°F
(32°C).
At high speed for quite a while.
In heavy traffic
--
especially in hot weather.
While pulling a trailer.
To
get the right reading, the fluid should be at normal
operating temperature, which is
180
OF
to
200
OF
(82
"
C
to
93°C).
Get the vehicle warmed up by driving about
15
miles
(24
km)
when outside temperatures are above
50°F
(10°C). If it's colder than
50°F
(lO"C), you may have
to drive longer.
Checking the
Fluid
Level
Park your vehicle
on
a level place. Keep the
engine running.
With the parking brake applied, place the shift lever
in PARK (P).
With your foot on the brake pedal, move the shift
lever through each gear range, pausing for about
three seconds in each range. Then, position the shift
lever in PARK
(P).
0
Let the engine run at idle for three to five minutes.
6-17
To Next Page
Loading...
