2-57
Power Sunroof (Option)
The sunroof includes a sliding glass panel and a
sunshade. The switch works only when the ignition or
retained accessory power (RAP) is active. See “Retained
Accessory Power (RAP)” in the Index.
To open the sunroof to the vent position only, push and
hold the front of the switch. You will need to open the
sunshade by hand. To close the sunroof from the vent
position, push and hold the rear of the switch.
To open the sunroof, push the rear of the switch once.
The sunroof and sunshade will open by themselves.
This is the express
-open feature.
To close the sunroof, push and hold the front of the
switch until the sunroof motor stops. The sunshade
must be closed by hand.
To Next Page
Loading...
