1-3
6-Way Power Seat (If Equipped)
This switch is designed to
imitate the movements of
your seat cushion. It is
located on the outboard side
of both the driver’s and the
passenger’s seat cushion.
To move the seat forward or rearward, slide the switch
forward or rearward. To raise or lower the seat, push the
switch up or down. To raise or lower the front portion of
your seat, push the front of the switch up or down. To
raise or lower the rear portion of your seat, push the rear
of the switch up or down.
Heated Front Seat (If Equipped)
The driver’s and
passenger’s heated seat
switches are located on
the instrument panel near
the comfort controls.
The driver’s switch is on the left, and the passenger’s
switch is on the right.
There are two settings, LO and HI. To choose the LO
setting, press the top part of the toggle switch once.
A light on the switch will glow when the LO setting has
been selected.
To choose the HI setting, press the top part of the toggle
switch twice. A light on the switch will glow when the
HI setting has been selected.
To turn the system off, press the lower part of the toggle
switch once. The light should go out when the system is
not in use.
To Next Page
Loading...
