Olimpia splendid AQUARIA SLIM 14 P

Questions and Answers

C
Colin EricksonAug 11, 2025
What to do if my Olimpia splendid AQUARIA SLIM 14 P doesn’t operate?
- S
  sarah69Aug 11, 2025
  If your Olimpia Splendid Dehumidifier isn't turning on, first ensure the power cord is properly plugged into the socket and that the socket has electrical voltage. Also, check if the tank full warning light is on, which indicates that the water tank is full or not correctly positioned. Empty the tank and reset the settings, or ensure the tank is correctly placed. The unit may not operate if the room temperature exceeds its maximum working conditions, as a self-protection feature is designed to protect it. Finally, the compressor protection might be active, preventing the unit from working.
S
Steven ThompsonAug 18, 2025
Why is my Olimpia splendid AQUARIA SLIM 14 P turning on and off frequently?
- B
  barbara14Aug 18, 2025
  If the dehumidifying function of your Olimpia Splendid Dehumidifier isn't working or it frequently turns on and off, consider these possible causes: - A clogged air filter may be the reason. Clean the air filter. - An open door or window may affect performance. Close any open doors or windows. - Blocked air inlet/outlet grilles can also cause this issue. Remove any obstructions or clean the grilles. - High humidity or a large room size may exceed the unit's capacity. Try to reduce the humidity level if possible.
A
annette43Aug 26, 2025
How to reduce noise from my Olimpia Splendid Dehumidifier?
- K
  Keith CruzAug 26, 2025
  If your Olimpia Splendid Dehumidifier is operating noisily, it could be due to the unit being tilted or placed on an unsteady surface. Place the appliance on an even, solid surface to reduce vibration. Also, a clogged air filter can cause noisy operation, so ensure you clean the air filter.
S
Susan FisherSep 1, 2025
What does E1 mean on my Olimpia splendid AQUARIA SLIM 14 P?
- B
  barreralindaSep 1, 2025
  If your Olimpia Splendid Dehumidifier's display shows 'E1', it indicates a faulty temperature sensor. Call the service center.