To Next PageTo Next PageHow to fix Olimpia splendid Controller that does not switch on?
If the Olimpia splendid Controller doesn't switch on, first check the connections between the power supply wires (230V ~) and the regulator terminals n°1-2. Also, check the connections between the CHARGE wires and the regulator terminals. Press the RESET key. Finally, ensure that the display shows the “sun” symbol in WINTER mode or the “snow” symbol in SUMMER mode.
What to do if Olimpia splendid B0152 Controller displays E03 or E04?
If the Olimpia splendid Controller displays E03 or E04, it indicates that the water probe is either broken or short-circuited. First, check the accuracy and integrity of the probe and its connections, replacing it if necessary. If the issue persists, disconnect the device from the main power supply, remove the probe to inhibit the minimum/maximum function, and then reconnect the device to the power supply.
What to do if Olimpia splendid B0152 displays E01 or E02?
If the Olimpia splendid Controller displays E01 or E02, it means the integrated room sensor is broken or short-circuited. Try pressing the RESET button. If the problem continues, the device needs to be replaced.
What to do if Olimpia splendid Controller behaves irregularly?
If the Olimpia splendid Controller behaves irregularly due to an unidentifiable cause, try pressing the RESET key. If the problem continues, the device should be replaced.
Why don't the keys on my Olimpia splendid B0152 Controller work?
If the keys on your Olimpia splendid Controller don’t seem to work, it might be because the keypad lock is enabled. Disable the keypad lock as described in the manual.
General| Brand | Olimpia splendid |
|---|---|
| Model | B0152 |
| Category | Controller |
| Language | English |
Physical dimensions of the regulator unit, illustrated in figure 1.
Explanation of symbols and indicators shown on the LCD display (fig. 6).
Description of the function of each button on the regulator control panel (fig. 7).
Essential safety precautions before installing and connecting the regulator.
Recommendations for optimal placement of the thermostat to ensure accurate readings.
Procedure for powering on the device and initiating the autotest sequence.
How to adjust the desired room temperature and fan speed manually.
Explanation of the automatic fan speed adjustment based on temperature.
How to perform a system reset and autotest.
Steps to restore the device to its default factory configuration.
How to switch between cooling (summer) and heating (winter) modes.
Method for enabling and disabling the keypad lock feature.
Procedure for turning off the system without losing settings.
How the minimum/maximum thermostat function controls the fan based on water temperature.
How to change the temperature display unit between Celsius and Fahrenheit.
Logic for manual operation in summer mode, including solenoid valve and fan behavior.
Logic for automatic fan speed control in summer mode based on temperature differences.
Logic for manual operation in winter mode, including solenoid valve and fan behavior.
Logic for automatic fan speed control in winter mode based on temperature differences.
Common causes and solutions for the equipment failing to power on.
Reasons why the displayed temperature may not match the actual room temperature.
Troubleshooting steps for when the display does not turn on after pressing RESET.
Solutions for when the device's keys do not respond to input.
Diagnosis and resolution for integrated room sensor errors.
Diagnosis and resolution for water probe connection issues.
Steps to take when the device exhibits unpredictable or unusual behavior.
Procedure to enter and navigate the device's parameter adjustment menu.
Details on available parameters, their default settings, and adjustable ranges.
Important note regarding temperature units used in parameters.
