Olimpia splendid B1012 User Manual (English)

Other manuals for Olimpia splendid B1012

Installation And Maintenance Instruction44 pages

Questions and Answers:

R
Rebecca MclaughlinAug 8, 2025
What to do if Olimpia splendid Remote Control air-conditioner does not respond to commands from the wall-mounted unit?
- K
  Kristin MayAug 9, 2025
  If the air-conditioner isn't responding to commands, there might be a few reasons. First, ensure the wall-mounted control panel encoding settings match those of the wireless B 1011 serial interface. Also, make sure neither the wall-mounted control panel nor the serial interface are near metallic or conductive objects or electric cables. Check that the selected operating commands on the B1011 receiving unit allow communication with the wall-mounted control panel. Finally, verify the connection between the wireless serial interface and the air-conditioner, ensuring the interface is functioning properly.
S
steven03Aug 14, 2025
How to fix Olimpia splendid Remote Control wireless B1012 wall-mounted control panel that does not work?
- J
  Justin EatonAug 14, 2025
  If the wireless B1012 wall-mounted control panel isn't working, first check if the batteries are inserted. If not, insert them. If they are inserted, ensure they are in the right way (polarity). If the batteries are old, replace them.
K
Kevin WellsAug 18, 2025
Why Olimpia splendid B1012 air-conditioner responds to commands but does not heat or cool?
- M
  Michelle RogersAug 18, 2025
  If your air-conditioner responds to commands but isn't heating or cooling, it could be due to a malfunction where the air-conditioner is blocked. Check the operating modes of the air-conditioner. Alternatively, the set temperature might be too close to the room temperature. In this case, increase or decrease the desired room temperature to heat or cool the room.
S
Shawna RichardsonAug 25, 2025
What to do if the Olimpia Splendid Control Panel air-conditioner does not respond to commands from the wall-mounted unit?
- J
  Joshua HartmanAug 25, 2025
  If the air-conditioner isn't responding to commands from the wall-mounted unit, verify that the wall-mounted control panel encoding settings match those of the corresponding wireless B 1011 serial interface. Also, ensure that neither the wall-mounted control panel nor the serial interface are near metallic or conductive objects, such as monitors, reinforced walls, or electric cables. Finally, confirm that the selected operating commands on the B1011 receiving unit allow communication with the wall-mounted control panel.
W
whitetashaAug 29, 2025
What to do if the Olimpia Splendid Control Panel air-conditioner responds to commands but does not heat or cool?
- J
  Jonathan SmithAug 29, 2025
  If your air-conditioner responds to commands transmitted via the wall-mounted unit but isn't heating or cooling, first check the connection between the wireless serial interface and the air-conditioner, ensuring the interface is functioning properly. Next, check the operating modes of the air-conditioner. Finally, increase or decrease the desired room temperature to heat or cool the room.
J
Jenny LeeSep 3, 2025
How to fix Olimpia Splendid Control Panel wireless B1012 wall-mounted control panel that does not work?
- J
  jennifer33Sep 3, 2025
  If the wireless B1012 wall-mounted control panel isn't working, try these steps: * Insert the batteries. * Make sure the batteries are inserted correctly, paying attention to the polarity. * Replace the batteries.