10
I
GB
MONTAGGIO A PARETE
Svitare le due viti (g. 5 rif. A) e separare il
supporto scheda (g. 5 rif.B) dalla base (g.
5 rif.C).
ATTENZIONE
Maneggiare con cura il supporto scheda per
non danneggiare la scheda elettronica.
5
A
A
C
B
2
2.5 MOUNTING ON THE WALL
Unscrew the two screws (fig. 5 ref. A) and
separate the card support (g. 5 ref. B) from the
base (g. 5 ref. C).
WARNING
Handle the card support with care, so as not
to damage the electronic card.