EasyManua.ls Logo

Olimpia splendid PELER 4D - Pre-Use Appliance Setup

Olimpia splendid PELER 4D
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
EN - 15
Theremotecontrolusestwodryalkaline1.5Vbatteries(AAA.)(Fig.E).
When replacing batteries, replace both and dispose of the dead batteries
in the appropriate collection centres and as required by law.
If the remote control is not used for several weeks or longer, remove the
batteries.
Any leaks from the batteries could damage the remote control.
Do not re-charge or disassemble the batteries. Do not throw the batteries
into the re.
They can burn and explode.
If the battery liquid falls onto the skin or clothes, wash well with clean
water. Do not use the remote control with batteries that have leaked.
The chemical products contained in the batteries can cause burns or
other risks to health.
3.2.c - Location of the remote control
Keeptheremotecontrolinapositionfromwhichthesignalcanreachthe
receiver of the appliance (maximum distance is approx. 6 metres - with
chargedbatteries)(gureD).
The presence of obstacles (furniture, curtains, walls, etc.) between the remote
control and the appliance reduces the remote control range.
3.3 - USE OF THE APPLIANCE
Work as follows in order to use the appliance.
3.3.a - Preliminary operations
Place the appliance on a stable and not inclined base, at least 15
cm. from the wall or from any other object, in order to ensure the
correct air circulation. Place it on a water-resistant surface since the