Olimpia splendid PELER 4D - Water Tank Filling Procedure

PELER 4D
ENGLISH
EN - 16
possible water leakage could damage furniture or the oor.
• Do not place the appliance directly on carpets, towels, blankets or
other absorbent surfaces.
• Insert the plug in the power socket; the appliance beeps and the
display shows room temperature in °C and the “B1” symbol.
Before electrically connecting the appliance, make sure the plate data
correspond to those of the electricity distribution network.
3.3.b - Filling
It is necessary to addwater in the tank (7) before the cooling/humidier
function is activated.
Water can be added from the upper part of the appliance or by opening the
water reservoir (7):
Make sure that the cap (g. A - pos.3) is positioned correctly.
- Toaddwaterfromtheupperpart,openthelid(1)(g.G),slowlypour
waterinthecompartment(7),thenclosethelid(1)again.
- Toopenthewaterreservoir(7)(g.H):
• rotatethehook(6)by90°(g.H);
• slidethereservoirout(7);
• Pourwaterintothecompartment(7);
• replacethereservoir(7)intotheapplianceandrotatethehook(6)
downwards(g.H).
• Checkthewaterlevelinthetank(7)throughthewater
levelgauge(12)(g.L).
• Do not ll the tank (7) beyond the maximum indicated level.
• Always use clean water.
• The appliance could produce a slight smell or the water in the tank (7)
could be slightly coloured during rst use; this events are normal and
absolutely harmless for the user’s health.