Olimpia splendid PELER 4D - Appliance Operating Procedures

ENGLISH
EN - 17
3.4 - INSTRUCTIONS FOR OPERATION
a. Insert the plug in the power socket.
When the appliance is switched on for the rst time, you will hear a beep and it will
go into stand-by. All buttons will be disabled, with the exception of the ON/OFF one.
The functions can be enabled or modied either from the control panel or from the
remote control.
b. Press th ON/OFFkey(A1)toswitchtheapplianceon(abeepisheard).
c. ON/OFFkey(A1)againtoswitchtheapplianceoff(abeeeepisheard).
A beep is heard every time a key is pressed.
d. Manuallyliftthehorizontalapsasdesired.
3.4.a - ON/OFF key (A1)
When the appliance is in stand-by, all buttons are disabled, with the exception
of the ON/OFF button.
Press the ON/OFF button to turn the appliance on. The display will show room
temperaturein°C.
The default initial fan speed is set at “low” and the operating mode is set at
“normal”. All functions are available.
3.4.b - Air speed key (A4)
Air speed can be changed according to this sequence:
Low ---
> Medium
---
> High
---
> Low
---
> ...
- TheLEDisdisplayedaccordingtothespeedsetonthepanel:
(Low)
(Medium)
(High)