Olimpia splendid PHENIX E - 3.7 - Timer Operation

PHENIX E INVERTER
ENGLISH
EN - 33
3.7 - TIMER OPERATION
START
Check that the unit is connected and is powered electrically.
a. Press key TIMER (6).
The current adjustment of the timer is shown on the display at the side of the Timer ON and Timer OFF
indicatorsandwillash.
b. Press the “TEMP” keys (4) to select the desired time.
“ ” Forward
“ ” Backward
Every time one of the “TEMP” keys (4) is pressed, the time moves forward or backward by 30 minutes,
depending on the direction of pressing.
c. Once the time has been set for TIMER ON and TIMER OFF, check that the TIMER indicator on the indoor
unit display is on.
MODIFICATIONS
• Repeat phases “a”, “b” and “c” to change the settings.
3.7.1-Switch-ontimersettingfromtheremotecontrol(gures33,34and37)
When the unit has been switched on, select the operational mode, the desired temperature and fan speed
with which the unit will activate on scheduled switch-on.
Successively put the machine in Stand-By.
Press key “TIMER” (6), ON symbol, to set the desired delay (from 1 to 24 hours) after which the unit will
switchon(startingfromtimerconrmation).
If no key is pressed within 5 seconds, the timer setting function ends automatically.
The remote control displays the countdown until switch-on.
Once the time set has expired, the unit starts with the last settings selected.
3.7.2-Switch-o󰀨timersettingfromtheremotecontrol(gures33,34and38)
With the unit in any operating mode, press key “TIMER” (6), OFF symbol, to set the desired delay (from 1 to
24hours)afterwhichtheunitwillswitchoff(startingfromtimerconrmation).
If no key is pressed within 5 seconds, the timer setting function ends automatically.
The remote control displays the countdown until switch-off.
Once the time set has passed, the unit switches off.