Olimpia splendid VERTIGO - Page 37

VERTIGO
EN - 13
ENGLISH
3.4.b - Ventilation air speed
 Settablespeedvariesfrom01(minimum)to09(maximum).
Remote control
Airspeedcanbeincreasedordecreasedbymeansofthekeys“+” or “-” (A8).
Press the key (A5) to select “Turbo”mode,onthedisplayappearsthesymbol“HH”;pressthekey(A5)again
to deactivate the function.
Display
AirspeedcanbeincreasedordecreasedbypressingthekeyON/OFF (D1) several times.
3.4.c - Ventilation air speed (heating mode)
 Settablespeedvariesfrom01(minimum)to04(maximum).
Remote control
Airspeedcanbeincreasedordecreasedbymeansofthekeys“+” or “-” (A8).
Display
AirspeedcanbeincreasedordecreasedbypressingthekeyON/OFF (D1) several times.
In heating mode, the function “Turbo” is not available.
3.4.d - Appliance oscillation
Remote control
Whiletheapplianceisrunning,pressthekey(A4)andtheappliancebodystartstorotatealternatively.
Pressthekey(A4)again,thefunctionturnso󰀨andtheappliancestopsinthechosenposition.
Display
While the appliance is running, press the ON/OFF key (D1)forapproximately3seconds,theappliancebody
starts to rotate alternatively.
Press the ON/OFF key (D1)againforapproximately3seconds,thefunctionturnso󰀨andtheappliance
stops in the chosen position.
3.4.e - Mode key (only activable from remote control)
3.4.e.1 - Fan mode
Toactivatethismode,pressthekey(A6).Tochangeambienttemperature,increaseordecreaseairspeed
bymeansofthekeys“+” or “-” (A8).
3.4.e.2 - Heating mode
activatethismode,pressthekey(A7).Ambienttemperature(°C)isshownonthedisplay.Toincreaseor
decrease temperature (min.1°C - max.30°C), use the keys “+” or “-” (A9). When set, the desired value con-
tinuestoblink(approximately10seconds)toconrmthesetting.
• Inthisfunctionitispossibletodecidewhethertoincreaseordecreaseairspeedbymeansofthekeys
“+” or “-” (A8).
• To activate this function, the temperature to be set MUST be higher than ambient temperature.
• Whenambienttemperaturereachesthesettemperaturevalue,theheatingfunctioninterruptsandthe
applianceblowsaslightbreezeforapproximately40seconds,thenitentersStand-bymode.
 Whenambienttemperaturedropsbelowthesettemperature,theheatingmodereactivatesautomatically.
• Default temperature is set at 25°C.
• After 9 hours of continuous operation, the appliance automatically stops operation.