Olimpia ISSIMO 11 - User Manual

ISS0011R10_A_EN.doc
ISSIMO 11
1.0 Technical data:
DESCRIPTION Unit of measurement Values
Cooling power (1) / (3) kW
3,0
Input power in cooling (1) W
1034
Nominal absorption (1) A
4,6
Annual consumption of energy in cooling (1)(Dir.2202/31/EC) kWh
517
E.E.R. -
2,64
Energy efficiency class in cooling (3) -
A
Supply voltage V-F-Hz
230-1-50
Minimum/maximum supply voltage V
196 / 253
Maximum input power (2) W
1175
Maximum absorption (2) A
5,2
Dehumidification capacity l/h
1,2
Air flow rate (max) m
3
/h
380-300-250
Ventilation speed -
3
Pipe length m
1,5
Electrical resistance (optional) W
-
Maximum remote control range (distance/angle) m/°
8 / 80°
Dimensions (Width x Height x Depth) mm
520x485x550
Weight (without packaging) Kg
36
Noise (sound power) db(A) min-max
34 - 43
Enclosure protection rating -
IP20
Refrigerant/load Type/Kg
R410A
Max operating pressure MPa
5,2
Power lead
No. poles x sect. mm
2
3 x 1.5
Fuse -
10AT
Indoor temperature Outdoor temperature
Maximum operating temperature in cooling DB 35°C - WB 24°C DB 43°C - WB 32°C
Minimum operating temperatures in cooling DB 18°C - WB 16°C DB 18°C - WB 16°C
Indoor temperature Outdoor temperature
(1) Test conditions to verify cooling power (EN 14511) DB 27°C - WB 19°C DB 27°C - WB 19°C
(2) High load test conditions DB 35°C - WB 24°C DB 43°C - WB 32°C
(3) Test conditions for verifying the efficiency class (EN 14511) DB 35°C - WB 24°C DB 35°C - WB 24°C

Summary

Technical Data

Introduction and Components

Introduction

Overview of user interface functions via remote control and display unit.

Electrical and Electronic Components

Details of the internal electrical and electronic parts of the device.

Parameters Table

Operating Modes

Standby Mode

Describes the standby function, its activation, and reset behavior.

Fan Mode

Details the fan-only operation, selectable with the remote control.

Cooling Mode

Explains cooling operation, fan speed control, and compressor management.

Dehumidifier Mode

Describes dehumidification function, fan speed, and compressor cycling.

Nighttime Mode

Details the cooling mode with adjusted setpoint and minimum fan speed.

Automatic Mode

Explains automatic selection of cooling or fan based on room temperature.

Functions and Indications

Programming Times

Information on setting two operating intervals in a 24-hour period.

Special Functions

Details on diagnostics and blackout behavior.

Display Indications

Overview of LED indicators for different operating states and malfunctions.

Wiring Diagram

Olimpia ISSIMO 11 Specifications

General

Refrigerant	R290
Cooling power (kW)	2.93 kW
Cooling power (BTU/h)	11000 BTU/h
Energy efficiency class (cooling)	A
Power Supply	220-240 V / 50 Hz