ISS0011R10_A_EN.doc
ISSIMO 11
1.0 Technical data:
DESCRIPTION Unit of measurement Values
Cooling power (1) / (3) kW
3,0
Input power in cooling (1) W
1034
Nominal absorption (1) A
4,6
Annual consumption of energy in cooling (1)(Dir.2202/31/EC) kWh
517
E.E.R. -
2,64
Energy efficiency class in cooling (3) -
A
Supply voltage V-F-Hz
230-1-50
Minimum/maximum supply voltage V
196 / 253
Maximum input power (2) W
1175
Maximum absorption (2) A
5,2
Dehumidification capacity l/h
1,2
Air flow rate (max) m
3
/h
380-300-250
Ventilation speed -
3
Pipe length m
1,5
Electrical resistance (optional) W
-
Maximum remote control range (distance/angle) m/°
8 / 80°
Dimensions (Width x Height x Depth) mm
520x485x550
Weight (without packaging) Kg
36
Noise (sound power) db(A) min-max
34 - 43
Enclosure protection rating -
IP20
Refrigerant/load Type/Kg
R410A
Max operating pressure MPa
5,2
Power lead
No. poles x sect. mm
2
3 x 1.5
Fuse -
10AT
Indoor temperature Outdoor temperature
Maximum operating temperature in cooling DB 35°C - WB 24°C DB 43°C - WB 32°C
Minimum operating temperatures in cooling DB 18°C - WB 16°C DB 18°C - WB 16°C
Indoor temperature Outdoor temperature
(1) Test conditions to verify cooling power (EN 14511) DB 27°C - WB 19°C DB 27°C - WB 19°C
(2) High load test conditions DB 35°C - WB 24°C DB 43°C - WB 32°C
(3) Test conditions for verifying the efficiency class (EN 14511) DB 35°C - WB 24°C DB 35°C - WB 24°C
To Next Page
Need help?
General