Oliso Smartiron User Manual

3
Getting To Know
Your Oliso® Smart Iron™
Alternatively, fill directly from a
faucet holding the iron
horizontally. Do not fill the tank
past the MAX fill line on the
side of the iron. Close the port
when done.
If you need to add water during
ironing, unplug the iron and
repeat the above steps. After
filling, make sure the iron is fully
reheated before ironing.
This iron is designed to be
used with regular tap water.
If your water is over 12 grams
of hardness, we recommend
using either inexpensive bottled
spring water or mixing half tap
water with half distilled water.
Never use 100% distilled water
as this can cause the iron to
spit and leak.
WATER RECOMMENDATIONS
Water Tank
Open the Flip Funnel™.
Leave the iron in a
horizontal position and
fill using the included fill
cup. Two fill cups equal the
maximum capacity of the
water tank.
Before filling, slide the
steam selector to off
( ). Make sure the iron is
unplugged.
1
8
7
6
5
4
3
2
13
12
10
9
11
1. Status Light
2. Steam Burst
3. Spray Mist
4. Steam Selector
5. Fabric Selector
6. Spray Nozzle
7. Detailer
8. iTouch™ Handle
9. iTouch™ over-ride
10. Flip Funnel
11. Water Tank
12. Soleplate
13. Scorch Guards

Oliso Smartiron Specifications

General

Brand	Oliso
Model	Smartiron
Category	Iron
Language	English