by pressing the direct access Loudspeaker key
(key above number 1) OR top right key during an
active call. If the preference is that audio for all
calls always divert to the loudspeaker, this can
be programmed in the phone’s settings. To do so:
1. Press the top left key to select Menu
2. Scroll to and select Settings
3. Scroll to and select Loudspeaker always
on
4. Select On
Note: if Loudspeaker always on is On, call
audio cannot be transferred back to the earpiece
speaker by pressing the loudspeaker key (key
above number 1) or the top right key during a call.
Voice guidance
The EasyFlip 2 is programmed to speak the
function of number and symbol keys, e.g.: “2”
and “#” (hash); and main menu headings, e.g.:
“phonebook”.
To deactivate/activate this function:
1. Press the top left key to select Menu
2. Scroll to and select Settings
3. Scroll to and select Voice guidance
4. Select either Key voice output or Main menu
To Next Page
Loading...
