EasyManua.ls Logo

Olitech EasyFlip 2 - Battery and Memory Card Insertion

Olitech EasyFlip 2
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Please note:
Before fixing the phones back cover in
place, please insert the memory card
(optional) and battery.
Memory card (optional)
A SD card/T-Flash card (memory card) can
be inserted into the phone to facilitate
additional memory. The memory cards
capacity should not exceed 64GB.
Inserting the Memory card:
When the back cover and battery are
removed, the memory card slot can be seen
to the right of the SIM slot. The memory
card slot is a sliding hinge style slot
(different style of slot to the SIM slot).
1. Gently slide silver clip up and you will
feel a small click. This unlocks the clip from
its fixed position.
2. Move silver clip to a vertical position
(hinges from the top). If you cannot gently
grasp the clip, you can turn the phone
upside down to bring it to a vertical
position.
3. Position the memory card on the open
slot, gold chip facing down.

Other manuals for Olitech EasyFlip 2

Related product manuals