Olitech EasyFlip 2 - Initial Setup and Power Management; SIM Card Installation Guide

10
Phone is using the 3G network
Phone is using the 4G network
Bluetooth is activated
Silent mode is activated
You have a missed call
You have an unread text message
You have an unread multimedia
message
An alarm is set
Amplify receiver volume is on
Flight mode is on
Meeting profile is activated
Outdoor profile is activated
Phone setup
Instructional video available at
www.olitech.com.au/easyflip2videos
Insert SIM card –
Step 1 - Remove the back phone cover
Slide the back cover down to remove. It is
recommended to hold the phone with two
hands, thumbs on the back cover, apply
light pressure through the pads of the
thumbs and slide down.