Thread the black side squeeze buckle
through the looped black cord and pull side
squeeze buckle to tighten.
Step 3: Re-attach lanyard material
Re-connect components of the black side
squeeze buckle to attach lanyard material.
Charging the battery
EasyFlip 2 charging components include:
• wall plug (connects to power point)
• micro USB charging/data cable
• charging cradle
Only use the Olitech battery and charging
components with this phone. Before using
the phone for the first time please charge
the battery for at least 4 hours. During the
charging process, do not remove the
battery from the phone. The phone/charger
may be warm during charging. This is
normal.
If the battery capacity is exhausted and
the phone powers off: 1) when
connected to a charger, it may take
several minutes for visual indicators
relating to charging to appear on the
phone; and 2) when the phone has
To Next Page
Loading...
