point and turn power point on.
3. Place/sit the phone into the cradle
charger (see image on front cover of
manual).
Charging with other devices
The phone can be charged by connecting
the micro USB charging cable to a
computer/car charging port.
Please note: If the phone is connected to a
computer via the USB charging cable, you
can view/transfer files on the EasyFlip 2.
See Connecting to PC on page 44 for
additional information.
Important Information:
When connected to a charger, the red
battery light on the front of the phone will
illuminate. If the battery is charging the light
will flash. If the battery is fully charged the
light will constantly illuminate. The
notification light status must be on for this
light to be displayed. If the phone
powers off due to insufficient charge,
when connected to a charger it will not
automatically turn on after it has
received sufficient charge. It must be
manually powered on.
To Next Page
Loading...
