computer for the purposes of:
• Charging; or
• Transferring files between the EasyFlip
2 and the computer.
To transfer files between a computer and
the EasyFlip 2:
1. Connect the EasyFlip 2 to a computer
using the EasyFlip 2’s micro USB cable
(remove from other charging
components prior to connecting to
computer).
2. A pop up message will appear on the
EasyFlip 2’s screen. Scroll to and select
USB storage.
3. The EasyFlip 2 will now be visible in the
computer’s My computer or This PC
folder as OLT2908V2.
The location where OLT2908V2 is
visible on the computer may vary.
4. Open the OLT2908V2 folder on the
computer. The folders on the EasyFlip 2
(phone) in Organiser → My files →
Phone should be visible in this folder. If
not, please disconnect the USB cable
from the computer and insert it into
another USB port on the computer.
To Next Page
Loading...
