Need help?Do you have a question about the Olympia LT-80 and is the answer not in the manual?
Details technical specifications like fuel consumption, voltage, motor power, and oil hose connections for different burner models.
Visual representation of furnace pressure versus combustion flow for various burner models.
Provides detailed dimensional drawings and measurements for different burner models.
Illustrates the burner's components and their names for easy identification and assembly.
Specifies the required dimensions for the burner combustion furnace for proper installation.
Step-by-step instructions for correctly mounting and securing the burner unit.
Visual schematic of the fuel flow path, including pumps, valves, and nozzles.
Guidelines for installing fuel piping systems, covering one-pipe and two-pipe configurations.
Sequential timing of burner operations, including pre-purge, ignition, and post-purge phases.
Wiring diagrams showing electrical connections for burner control and operation.
Details the critical dimensions and spacing within the combustion head assembly.
Instructions for adjusting the air damper to optimize combustion efficiency.
Procedures for removing, cleaning, and replacing the fuel nozzle for maintenance.
Explains the function and maintenance of the flame detection system for safety.
Provides external drawings, specifications, and control methods for the gear pump.
Details the function and operation of the ignition transformer for starting the burner.
Instructions on handling, cleaning, and replacing the fuel filter to ensure fuel quality.
Lists checks to perform before burner operation and routine maintenance tasks.
A table outlining common burner problems and corresponding troubleshooting actions.
Detailed breakdown of common troubles, their causes, and recommended corrective actions.
To Next Page
General