CONTENT
1. INTRODUCTION OF PRODUCT.
1) BURNER SPECIFICATION.
2) COMBUSTION PERFORMANCE GRAPH.
3) SIZE AND DIMENSION.
4) EXPLODED DRAWING OF BURNER AND PART NAME.
2. HOW TO CONTROL BURNER.
1) BURNER COMBUSTION FURNACE DIMENSION.
2) HOW TO INSTALL BURNER.
3) DIAGRAM OF FUEL CIRCULATION SYSTEM.
4) HOW TO INSTALL FUEL PIPE SYSTEM.
5) TIME CHART.
6) ELECTRIC CIRCUIT DIAGRAM.
3. HOW TO USE MAJOR PARTS.
1) COMBUSTION HEAD DIMENSION.
2) HOW TO ADJUST COMBUSTION OF AIR FLOW RATE.
3) HOW TO DISASSEMBLE, CLEAN AND REPLACE NOZZLE.
4) FLAME DETECTOR.
5) GEAR PUMP.
6) IGNITION TRANSFORMER.
7) FUEL FILTER.
4. GENERAL BURNER OPERATION.
5. HOW TO CHECK BURNER, CAUSE OF TROUBLE AND COUNTER MEASURE.
1) CHECK OF BURNER.
2) BURNER TROUBLE/ACTION TABLE.
3) CAUSE OF COUNTER-MEASURE ACTION.
To Next Page
Loading...