Olympia PMR 1208 User Manual

12
Setting the Volume
You can set the volume of incoming signals when the
walkie-talkie is in Standby mode�
1 Use the and keys to set the required
volume� The volume set appears
at the bottom edge of the display� The more bars
displayed, the higher the volume�
Display Lighting
You can switch on the display lighting, if necessary�
1 Press the Display Lighting key�
Switch the display lighting off again when no longer
required to save the batteries�
2 Press the Display Lighting key again�
Automatic Switch-Off
You can dene whether the walkie-talkie should be
switched off automatically after a certain period of time
(1 to 4 hours)�
1 Press the
MENU
key ve times.
appears in the display�
2 Use the and keys to select the required
period of time�
3 Conrm your input by pressing the
PTT
key�
Setting the Key Tones
You can dene whether a tone is issued each time a
key is pressed�
1 Press the
MENU
key six times�
appears in the display�
2 Use the and keys to switch the key tone
on or off�
3 Conrm your input by pressing the
PTT
key�
VOX Function
You can use the VOX function when the microphone
should be activated automatically on detecting a sound�
You can set one of three different sensitivity levels�
1 Press the
MENU
key three times�
appears in the display�
2 Use the and keys to select the required
sensitivity for the microphone�
3 Conrm your input by pressing the
PTT
key�

Olympia PMR 1208 Specifications

General

Brand	Olympia
Model	PMR 1208
Category	Two-Way Radio
Language	English