43
Charging the Battery, Charging Cradle
1 Connect the power adapter plug on the charging
adapter to a properly installed power socket.
2 Connect the microUSB plug to the
microUSB connection port on the charging
cradle. The microUSB plug is protected against
reverse polarity.
3 Place the mobile phone in the charging cradle.
cAUtiON! Do not remove the battery while
the mobile phone is being charged. Discon-
nect the charging cable from the mobile
phone before changing or removing the
battery.
4 When the phone battery is fully charged, disconnect the connection
to the power supply. This reduces power consumption.