Power Bounce Grip 2
Converts the T32 (or T20) into
a
grip
type
electronic
flash
unit.
Consists of a bracket section and
a grip section which contains
4 C batteries to provide a power-
ful supplementary power source.
The bounce head can be angled
90° up, 20° down, 60° right and
240° left allowing free choice of
bounce and close-up flash photo-
graphy. Electrical connection
with the camera is made via the
TTL Auto Cord T and TTL Auto
Connector.
TTL Auto Cord T 0.3m, 0.6m,
2m, 5m
Used for off-camera flash opera-
tion (e.g., bounce flash, multi-
unit flash). Available in 4 dif-
ferent lengths.
Electronic Flash AC Adapters
Enables operation of the T10
Ring Flash 1 and its modelling
lamp on AC current.
M. Grip Cord
Connects the Motor Drive 1 (or
Winder) with the shutter release
incorporated in the bounce grip
for comfortable motor-driven
flash photography.
6V Power Pack 2
An
auxiliary
power
source
unit
for the modelling lamp of the
T10 Ring Flash or winder units.
Powered by four D size batteries.
Electronic Flash AC Adapter 2
80
To Next Page
Loading...
