Need help?Do you have a question about the Olympus OFP-2 and is the answer not in the manual?
General| Flow Rate | 2.4L/min |
|---|---|
| Dimensions | 160mm(L) x 60mm(W) x 80mm(H) |
| Weight | 0.4kg |
| Power consumption | 15W |
| Voltage | 12 V DC |
Details the device's purpose, contraindications, target audience, and intended users.
Covers manual usage, equipment compatibility, and repair/modification policies.
Explains signal words (WARNING, CAUTION, NOTE) and general safety precautions.
Provides essential EMC information for safe installation and operation.
Verifies all OFP-2 items are present and undamaged upon unpacking.
Verifies MAJ-1603 items are present and undamaged if purchased separately.
Lists consumable parts with product codes and descriptions for ordering.
Identifies and explains the function of each control and indicator on the front panel.
Details the connectors and indicators located on the rear panel of the unit.
Explains various symbols and labels used on the device, including UDI and regulatory markings.
Explains why proper cleaning, disinfection, and sterilization are critical for preventing cross-contamination.
Provides a visual overview of the recommended cleaning and sterilization methods and steps.
Details compatible reprocessing methods and chemical agents for the device and its components.
Lists the necessary equipment for performing proper cleaning and sterilization procedures.
Outlines the step-by-step process for manually cleaning the water container and cap.
Describes the procedure for steam sterilization of the water container and cap using an autoclave.
Provides instructions for the daily care and cleaning of the OFP-2 unit to maintain its condition.
Details the proper environmental conditions and procedures for storing the OFP-2 equipment.
Outlines the routine maintenance tasks recommended for the OFP-2, including checks and tests.
Step-by-step guide on how to detach and attach the pump head for replacement or cleaning.
Details the process for replacing the fuses in the OFP-2 unit, including safety precautions.
Specifies that repairs must be done by qualified personnel and provides troubleshooting steps for pump failure.
Lists consumable spare parts with their part numbers for ordering and maintaining the OFP-2.
Details the product classification, EMC compliance, and electrical shock protection standards met by the OFP-2.
Provides information on regulatory compliance (e.g., CE marking) and end-of-life disposal directives.
Specifies the physical dimensions, weight, and year of manufacture for the OFP-2 unit.
Describes pump operation, flow rate control, and recommended settings for various uses.
Details the capacity and sterilization compatibility of the water container.
Provides solutions for issues like no power, poor flow, unintended flow, and electromagnetic interference.
Explains the OFP-2's EMC testing and compliance with relevant standards for safe use.
Describes how the OFP-2 maintains essential functions during electromagnetic disturbances.
Details the suitable electromagnetic environments for operating the OFP-2, including healthcare facilities.
Lists the OFP-2's compliance with standards for RF emissions, harmonic emissions, and voltage fluctuations.
Details the OFP-2's immunity levels against various electromagnetic disturbances like ESD and surges.
Warns about using specified accessories and cables to avoid EMC issues and ensure proper operation.
Outlines procedures for decontaminating and disposing of the OFP-2 at the end of its useful life.
Shows recommended combinations of equipment for use with the OFP-2 and warns against unapproved combinations.
To Next Page
