27
Chapter 1
1
Before turning the camera on, press
the tabs on the lens cap to remove it.
2
Press the power switch to turn on the
camera.
● The lens moves out when the mode dial
is not set to .
● The monitor turns on.
● To turn off the camera, press the power
switch again.
● If the date/time has been returned to the
factory default setting, “Y/M/D” appears
on the monitor (P. 29).
Power on/off
Power switch
Lens cap
● To save battery power, the camera automatically enters the Sleep mode
after about 1 minute of non-operation. The camera activates again as
soon as you touch the zoom lever or mode dial, etc. Sleep time interval
can be set in the P/A/S/M and modes (P. 117).
● To minimize power consumption when using the camera, set BATTERY
SAVE to ON (P. 117).
TIPS
To Next Page
Loading...
