1
In the top menu, select MODE MENU T PICTURE T , then press
í. ~ “How to use the menu” (P. 39)
● When is displayed on the top menu, press
Ñ, É or ñ according to
the arrow shown next to . This allows you to set directly instead of
via MODE MENU.
2
Press Ññ to select the desired record mode (refer to the table on
the previous page).
When you have chosen SQ2: Press
í to select the resolution. Go to
step 3.
When you have selected any other record mode: Go to step 4.
3
Press Ññ to select the resolution (refer to the table on the previous
page).
4
Press to save the setting.
Record mode
Factory default setting: HQ
1
: In the top menu, select T SHQ, HQ, SQ1 or
SQ2.
● In these shooting modes, resolution cannot be
selected. SQ2: 640 x 480
: In the top menu, select T HQ or SQ.
~ “How to use the menu” (P. 39)
2
Press .
To Next Page
Loading...
