10 En
En
J ATTACHING THE STRAP AND LENS CAP
1
Pass the lens cap string through
the hole in the lens cap.
2
Fasten the strap to the strap
eyelet as shown in the diagram.
3
Adjust the strap to the desired
length. Pull the strap through the
stopper (A) and make sure it is fastened
securely
.
4
Attach the strap to the other eyelet in the
same way.
J LOADING THE BATTERIES
1
Make sure the camera is turned off.
• The monitor is off.
• The viewfinder is off.
• The lens is not extended.
2
Slide the battery
compartment lock from
= to ).
strap eyelet
A
Battery
compartment
cover
Battery
compartment
lock
basic_e_po167_6.fm Page 10 Tuesday, February 4, 2003 5:06 PM
To Next Page
Loading...
