14 En
En
3
To turn the camera off, press the power switch again.
• To save battery power, the camera automatically enters the sleep
mode and stops the operation after about 3 minutes of non-
operation. The camera activates again as soon as you operate the
shutter button or zoom lever.
J SELECTING A LANGUAGE W
1
Set the mode dial to P and press the power switch to turn
the camera on.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac to select W, then press d.
6
Press ac to select a language, then press e.
7
Press e again to exit the menu.
8
To turn the camera off, press the power switch.
J SETTING THE DATE AND TIME X
XX
X
1
Set the mode dial to P and press the power switch to turn
the camera on.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac
acac
ac to select X
XX
X, then press d.
• The green frame moves to the selected item.
Note
basic_e_po167_6.fm Page 14 Tuesday, February 4, 2003 5:06 PM
To Next Page
Loading...
