24
1
Getting started
Power on/off
1
Press the tabs on the lens cap
as indicated by the arrows and
remove the lens cap.
2
Press the power switch.
• The power turns on and the lens
extends when the mode dial is set to
any mode other than q. The
viewfinder turns on.
• When the mode dial is set to q, the
camera turns on in the playback mode
and the monitor turns on.
3
To turn the camera off, press the power switch again.
TIPS
• To save battery power, the camera automatically enters the sleep
mode and stops the operation after about 3 minutes of non-
operation. The camera activates again as soon as you operate the
shutter button or zoom lever. The sleep time interval can be set in
any shooting mode (except q). g“SLEEP - Sleep Timer”
(P.144)
Mode dial
To Next Page
Loading...
