70
Focusing applications
5
Advanced shooting
AF AREA – Changing the position of the AF target
mark
You can select the area you want to focus on by changing the position of the
AF target mark.
1
Set the AF mode to SPOT.
g“AF MODE - Changing the focus
range” (P.68)
2
In the top menu, select MODE
MENU Æ CAMERA Æ AF AREA,
and press d.
3
Use the arrow pad to move the AF
target mark to the area you want to
focus on.
• The AF target mark at the center of the
screen can be moved vertically or
horizontally.
4
Take the picture.
• To restore the AF target mark to its original
position (at the center), press e.
•Press e again to exit AF target mark selection mode.
• AF AREA is not available when the digital zoom is set to ON.
• The location of the AF target mark cannot be saved.
Mode dial
Arrow pad
OK button
AF AREA
SELECt CANCEL
AF target mark
Note
To Next Page
Loading...
