En 13
En
J TURNING THE POWER ON/OFF
1
Press the tabs on the lens cap
as indicated by the arrows and
remove the lens cap.
2
Press the power switch.
• The power turns on when the mode dial
is set to any mode other than q. The
lens extends and the viewfinder turns
on.
• When the mode dial is set to q, the
camera turns on in the playback mode
and the monitor turns on.
3
To turn the camera off, press the
power switch again.
• To save battery power, the camera automatically enters the sleep
mode and stops the operation after about 3 minutes of non-
operation. The camera activates again as soon as you touch the
shutter button or zoom lever.
Mode dial
Note
basic_e_po166_6.fm Page 13 Thursday, January 9, 2003 2:48 PM