Olympus Camedia C-750 Ultra Zoom - Selecting a Language; Setting the Date and Time

14 En
En
J SELECTING A LANGUAGE
1
Set the mode dial to P and press the power switch to turn
the camera on.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac to select W, then press d.
6
Press ac to select a language, then press e.
7
Press e again to exit the menu.
8
To turn the camera off, press the power switch.
J SETTING THE DATE AND TIME
1
Set the mode dial to P and press the power switch to turn
the camera on.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac
acac
ac to select X
XX
X, then press d.
• The green frame moves to the selected item.
6
Press ac
acac
ac to select one of the following date formats: Y-
M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press d.
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
basic_e_po166_6.fm Page 14 Thursday, January 9, 2003 2:48 PM