24
1
Getting started
Power on/off
1 Press the tabs on the lens cap as
indicated by the arrows and
remove the lens cap.
2 Press the power switch.
• The power turns on and the lens extends
when the mode dial is set to any mode
other than q. The monitor turns on.
• When the mode dial is set to q, the
camera turns on in the playback mode
and the monitor turns on.
3 To turn the camera off, press the
power switch again.
TIPS
• To save battery power, the camera automatically enters the sleep
mode and stops the operation after about 3 minutes of non-
operation. The camera activates again as soon as you operate the
shutter button or zoom lever. The sleep time interval can be set in
any shooting mode (except q). g
“SLEEP - Sleep Timer” (P.151)
• If the camera is subjected to strong vibrations or shocks while it is
turned on, the camera may immediately turn off and reset the date
and other settings.
Mode dial
Note
To Next Page
Loading...
