78
Metering
5
Advanced shooting
MULTI METERING
1 When using the camera in the
p mode, multi-metering is
not available in the M mode. Set
to any mode except M.
g“A/S/M mode” (P.65)
• If a function other than AE lock is
registered on x, set AE lock to
the button.
g“Setting the custom button” (P.138)
2 In the top menu, select ESP/5
MULTI, and press e.
• In the top menu, the setting can be made in the same way as selecting
MODE MENU CAMERA ESP/5 MULTI.
g“How to use the menus” (P.33)
•Press e again to exit the menu.
3 Position the AF target mark on the
area you want to meter and press
x. The brightness is metered
at up to 8 different points.
• Multi-metering bar appears.
• Brightness meter readings are ignored
after the 9th reading.
• To perform metering again, press
x for more than 1 second to display C. Press x again
to cancel the metering values.
Mode dial
Arrow pad
OK button
To Next Page
Loading...
