32 En
En
• The MOVIE PLAYBACK menu is displayed again after playback ends.
PLAYBACK : Plays back the entire movie again.
FRAME BY FRAME :
Plays back the movie manually one frame at a time.
EXIT : Leaves the movie playback mode.
Press to select from PLAYBACK, FRAME BY FRAME or EXIT,
and press .
When FRAME BY FRAME is selected
: Displays the first frame of the movie.
: Displays the last frame of the movie.
: Displays the next frame. The movie can be played continuously by
holding the button down.
: Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
: Displays the MOVIE PLAYBACK menu.
J PROTECTING PICTURES
You are recommended to protect important pictures to avoid accidentally
erasing them.
1 Set the power switch at .
• The monitor turns on and displays the last picture taken.(Single-frame
playback)
2 Use the arrow pad to display the picture you want to
protect.
3 Press .
• The top menu is displayed.
4 In the top menu, select MODE MENU → PLAY → , and
press .
5 Press to select ON, and press .
• To cancel protection, select OFF.
• Press again to exit the menu.
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased when you execute format.
Note
x100_Basic.book 32 ページ ２００４年１月２１日 水曜日 午後４時１３分
To Next Page
Loading...
