119
8
USB Microphone/USB Speaker
Uses as a USB microphone
When the recorder is used as a USB microphone, it can used to make recordings with the DSS Player,
and can also be used to input data on a computer using voice recognition software or other applications.
When using the recorder as a USB microphone, switch the recorder to the [Audio] mode in the [Audio
Setup] described on the previous page, then perform the following setting.
Windows 2000
Select [Control Panel] = [(Sound and) Multimedia] = [Audio] tab, and select the [USB
Audio Device] from the recording device.
Windows XP
Select [Control Panel] = [Sound and Audio Device] = [Audio] tab, and select the
[Microphone Control (DVR)] from the recording device.
..................................................................................................................................................
Notes
• If the USB class is set to “Audio Class” in the menu setting of this recorder, this recorder will not be
displayed as a removable disk drive. Reset to the “Storage Class” class then connect to the computer.
• Changing the USB speaker can be executed from the [Control Panel] as well as the USB microphone.
• When using it as a USB microphone, regardless of the recording mode of this recorder, it becomes the
USB stereo microphone. If you want to connect an external microphone to this recorder, use a stereo
microphone.
USB Microphone/USB Speaker
To Next Page
Loading...
