Olympus DS 30 - Viewing System Information (System Info.)

81
4
3
Viewing system information (System Info.)
You can check the recorder's information on the menu screen.
1
While the recorder is stopped, press the
MENU button for 1 second or longer.
The menu opens ( ☞ P91,93).
2
Press the + or – button to choose
“System Info.”.
3
Press the OK or 9 button.
“Capacity” “Model Name” will appear. Every
time the + or – button is pressed, “Version”
“Serial” and “Capacity” “Model Name” will
appear alternately.
4
Press the STOP button to close the
menu.
Viewing system information
1
2
4