61
3
“Volume” setting
1 Press the
+ or – button to adjust the volume.
2 Press the OK button to exit “Volume” selection.
Press the PLAY button to check the volume.
“Alarm” setting
1
Press the
+
or
–
button to choose an alarm sound
from among “Alarm1”, “Alarm2” and “Alarm3”.
2 Press the OK button to exit “Alarm” selection.
Press the PLAY button to check the alarm sound.
“Playback File” setting
1 Press the + or – button to choose from “No
File Play”, “File Select”.
No File Play: Sounds alarm only.
File Select: Plays back a selected file after the alarm.
If “File Select” is chosen and the OK or 9
button is pressed, the screen goes to the file
setting for Alarm Playback.
Use the
+ or – button to select a file, and press
the OK or 9 button to go to file selection.
Similarly, use the + or – button to select a file.
2
Press the OK button to exit “Playback File”
selection.
Alarm Playback Function
Alarm Playback Function (Alarm)
2
1
2
1
2
1
To Next Page
Loading...
