14
En
1 Press flash mode button ( ).
Flash setting screen is displayed.
2 Press [\ to select the flash mode, and press i.
You can also set by pressing repeatedly.
3 Press the shutter button halfway.
In conditions where the flash will fire, # lights (flash stand-
by).
4 Press the shutter button completely to take the picture.
Flash working range:
W (max.): Approx. 0.2 m to 3.8 m (0.7 ft. to 12.5 ft.)
T (max.) : Approx. 0.5 m to 2.2 m (1.6 ft. to 7.2 ft.)
Icon Flash Mode Description
No
indication
Auto flash The flash fires automatically in low light or backlight
conditions.
!
Red-eye
reduction flash
The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the
regular flash.
#
Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire even in low light conditions.
Flash Modes
d4317_oima_e_basic_00_bookfile_7.book Page 14 Friday, December 9, 2005 6:35 PM
To Next Page
Loading...
