19
En
Use the video cable provided with the camera to playback recorded images on your
TV. Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the VIDEO OUT jack
on the camera to the video input terminal on the TV using the video cable.
2 Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3 Press the power switch to turn the camera on, and press k.
The last picture taken is displayed on the TV. Use the arrow pad to select the picture you
want to display.
CONNECTING THE CAMERA
Playback on a TV
Connect to the TV’s video input
(yellow) terminal.
Video cable
VIDEO OUT jack
Connector cover
d4317_oima_e_basic_00_bookfile_7.book Page 19 Friday, December 9, 2005 6:35 PM
To Next Page
Loading...
